I’ve been busy getting ready for St. Patrick’s Day. I have to say, I’m a little disappointed in the stores. I’ve been having some trouble finding cute decorations. THIS girl MUST decorate for all of the holidays!! Not to worry I probably would have paid big bucks for this runner at the store. And it was really inexpensive to make. And took a whole 10 minutes. Even if you are a beginner sewer this is a project for you! And if you aren’t a sewer? I bet you could use some iron on tape. 🙂
You will need:
St. Patrick’s Day Burlap Fabric in a length that will fit your table (I got mine at Joann Fabrics – get it online here for $4.99 a yard!)
I used a side table so the width of the words was perfect on my fabric. I purchased 2 yards and was able to get enough to make 3 runners! I purchased 1 1/2 yards of green lace and used it all on this one runner. The more layers you want the more lace you will need!
Pin the sides up. Like I said, I used the words on my fabric as a guide. They were the perfect width!
Pin up the bottom! That way no rough edges hanging out. Then just sew all the way around.
Then starting with the bottom layer, sew a strip of lace on.
Layer the lace on!
See I told you it was EASY!!
I kind of love it.
Ok. I really love it.
Subway art + burlap + lace … what is honestly not to love?
Make sure to pin it! 🙂
Linking up here.
DIY Foam Dog Bed
This shop has been compensated by Collective Bias, Inc. and its advertiser. All opinions are mine alone. #ToPetsWithLove #CollectiveBias
If you have read our blog before or if you follow us on social media, then you know that we are kind of animal people. Our four pets live like kings with the best food, treats, sweaters, and they even get subscription boxes filled with toys each month. We spoil them because we love them. 🙂 One thing that both of our dogs love though is having a dog bed. However, our traditional dog beds normally don’t last long. George likes to kind of knead the stuffing inside and make a nest. And one day, a hole pops open and then it goes from bed to the most fun dog toy ever. Stuffing is EVERYWHERE. Our last bed made it look like a winter blizzard in our living room! So I’ve been looking at some different options on replacing the beds. I decided I wanted a foam bed this time. Soft, but nothing for George to squish around.
I looked and looked for one that would match our living room decor, but then it hit me that I should make my own! One with removable covers so that I can change for the holidays and seasons. I mean, if I’m going to have a big dog bed on the ground in the living room it should look nice right?
So here you go! The perfect doggie Christmas gift! A foam bed, with a waterproof protective liner and removable cover. Washing it is super easy, changing to another cover is super easy and by the looks of things, it’s super comfy. In fact, even as I write this, George is still laying on it. He hasn’t gotten off since I put it down! Our cat Lou tried to wonder over to test it out, but right now George isn’t ready to share with him yet. Poor Lou!
Speaking of gifts for our dog…They have everything they could ever want (and more!) so along with their new bed, they will be getting some of their favorite things: Purina Beneful Incredibites for George and a big bag of Beggin’ Strips for Lincoln. George loves his Purina Beneful Incredibites because they are made specifically for small dogs so they are easy for him to chew. I like to purchase it because meat is the #1 ingredient and there is now no added sugar. Plus, with whole grains and veggies I know he’s getting the nutrition he needs!
Lincoln loves Beggin’ Strips (and so does George!) They smell like bacon and taste like bacon because they are made with real bacon!
(Psst! Now through the end of November, take advantage of great savings on your favorite Purina pet products available at Kroger with this Coupons.com link, while supplies last.)
I also love that everything is available easily at Kroger. I’m there anyways buying our groceries so this means I can take care of our pets all in the same place. They have everything we need for our dogs – and our cats!
You Will Need
Foam – I used 3 inches thick. You can get it at the craft store, but I recommend waiting until it goes on sale and/or using a coupon! The foam I used was normally $40 but it was on sale for $20 plus I had a coupon! So good deal!
Vinyl Tablecloth – I picked up a clearance Halloween print. It’s on the inside so nobody will be able to see what it is. You will want a slightly thicker tablecloth.
Strong Tape – like packing tape or duck tape
Blanket – I sourced our local thrift shop! I found this great red and white blanket that looks like a knit Christmas sweater for just a few dollars!
Zipper (I found one the length of the smaller side of the foam)
Thread
Scissors
Sewing Machine
First you will want to wrap your foam with the tablecloth. Think like a present. Use the tape to keep it secure.
Why the tablecloth? Foam is super comfy for dogs (and great for dogs who need an orthopedic bed!) but it absorbs everything! This layer will be waterproof so even if your dog has an accident, gets sick, comes in from the rain, or drools the foam will stay clean and dry! And as a bonus, it helps it slide into the cover easily.
Lay your blanket right side down and place your foam on top. I removed the binding around the blanket to make it easier to sew. My first thought was I could make two thinner covers with this blanket since the layers were loose after the binding was removed. But then I thought a white furry fabric probably won’t be so nice after coming in from the snow! 🙂
Fold over the blanket and pin around the edges. You are going to end up sewing 2 sides completely closed: one end and the long side. The third side is where you will sew your zipper onto. Trim off any excess fabric.
On your last open end, sew your zipper in.
Slide your foam in and call your dog! If they are like ours they will be so excited that they bring a few toys with them!
George and Lincoln love their new bed!
It’s plenty big enough for both of them to lay together, which they like a lot.
So really the only question is…
To cuddle
Or not. 🙂
If you love this project you will finds lots of fun inspiration here for your pets!
DIY Un-Paper Towels
This shop has been compensated by Collective Bias, Inc. and its advertiser. All opinions are mine alone. #PledgeReflectionOfYou #CollectiveBias
Have you ever heard the saying, “Home is where the heart is?” How true! Home is where we spend time together, re-charge, make memories, and so much more. I also am a big believer in the idea that your home environment has an affect on you. I know personally, when my home is clean and organized, I feel so much better. I want to be there more, I want to create more memories with my family, and I re-charge SO much better. My home may not look like it is straight out of a magazine, but it’s my home, filled with things that I love and is a true reflection of my family. For me, my home is my heart!
About a year ago, I made my first pair of un-towels. I probably justified it to myself saying, “Well, you can’t clean until you have something pretty to clean with.” I got to pull out my sewing machine instead of tackling a closet. But ever since, I’ve been hooked!
I love our un-towels!
They are pretty. I think somewhere out there it’s a proven fact that cleaning is more fun when you have pretty things to clean with. Ok, so maybe it’s not proven, but it should be.
They are nice and thick. We actually keep two sets – one for people to use while eating or with food, and one for us to use with cleaning products. Paper towels are great and all, but we just need one un-towel for any mess.
When you are done, you just throw them in the wash! Simple.
They are inexpensive.
They are easy to make. SUPER easy!
Here is how you make them!
First, gather your supplies. You will need a yard of fabric, a towel, thread, scissors and a sewing machine. Remember when you are picking your fabrics that you are using, that these are to clean up messes, so white or super light colors may not work out the best. Pre-wash your fabric and towel to avoid any shrinking later!
First, cut your fabric. I like mine in 10 inch squares.
Once your fabric is cut, you are going to lay your towel out and cut out 10 inch squares of the towel. I was able to get about 6 squares from one towel.
Don’t be afraid to use the decorative parts of the towel!
Pin your fabric face side down on the towel.
Sew along the edges leaving a space 4-5 inches long open so you can turn your un-paper towel right side out.
Turn your towel right side out and sew along the edge again. This time you will close the gap. Don’t forget to backstitch at the end!
And finally, I like to sew a wavy line through the center of my towels. This way they just stick together better in the wash.
That’s it! We are going to use the blue ones in our kitchen and the super fun pink ones (with the vintage trailers and cars) for cleaning!
Aren’t they fun?
Who doesn’t want to clean with fun towels?
I use my towels all the time. Seriously every day! Just like I use Pledge® every day! It’s easy to find at Kroger, and does an awesome job and smells good. I always have several of their products on hand at home, but my two favorites are the Pledge® Multi Surface Everyday Cleaner with Glade® Rainshower® and Pledge® Orange Clean Furniture Spray. Pledge® helps me keep the home I love cared for and beautiful.
I love that the Pledge® Multi Surface Everyday Cleaner with Glade® Rainshower® can be used on almost every single surface in my home! Seriously, you can use this on Wood, Laminate, Stainless Steel, Leather, Marble, Granite, Plastic, Porcelain, Glass and Electronics. Is there honestly anything left? Plus, it smells GOOD!
The Pledge® Orange Clean Furniture Spray honestly reminds me of my mom. I would always help her dust when I was little (except we used the lemon scent), and I loved spraying the Pledge®. I’m a huge fan of the Pledge® smell – to me it just means clean. I used to think that this could only be used on wood, but did you know it can also be used on Laminate, Stainless Steel, Leather, Marble, Granite and Plastic?
There are so many things in my home that are special to me, and it’s nice to have a product that I trust to keep my treasures safe and looking as great as they did the day I got them! We all have items that are irreplaceable. For me, some of these items include my grandmother’s hope chest, my mother’s jewelry box, and a few sweet things that Joshua has made me over the years. I keep these things out on display all year long, so I want to keep them looking nice! Pledge® is the only product that I trust to clean them, protect them, and keep them looking their best!
Do you know another HUGE reason that I’m a big Pledge® fan? Because they also feature Allergens Trappers® to remove dust and up to 90% of the allergens found in dust. With kids and pets that is super important to me! So quick! Whip up a set of un-paper towels, pull out your favorite Pledge® bottle and enjoy your clean, happy home!
This shop has been compensated by Collective Bias, Inc. and its advertiser. All opinions are mine alone. #BetterBreakfast #CollectiveBias
Before I was a mom I was a preschool teacher. I quickly learned that the favorite center in our classroom was the pretend kitchen. The kids loved whipping up food just like their parents did at home or even creating some crazy concoctions of their own. When I had my son, pretend play was one of our favorite things to do together! I started whipping up pretend food and soon, we had a big collection! This sewing project is a fun DIY that your kids will love!
How adorable is this felt food breakfast? The best part about felt food is that you can make whatever your imagination can think of! Here is what we made in our breakfast felt food set.
You will need:
White Felt
Yellow felt
Cut a white blob shape (very, very technical term!) out of the white felt. You really can’t go wrong with your shape! Out of the yellow felt, you will cut a round circle for the yolk. Sew (or glue) the yolk to the middle of the egg.
(TIP: These are super fun to put inside plastic Easter eggs so your child can ‘crack’ their eggs open!)
Every breakfast needs bacon!
You Will Need:
Dark brown felt
Light brown felt (or tan)
Cut out a wavy thick strip out of the dark felt. Then, the same length, you will cut out a few strips of slightly wavy light brown pieces. Sew your light brown pieces to your dark brown piece.
Both the eggs and bacon can be made with fabric glue which is great if you don’t have a sewing machine!
Bread is a little harder to make. If you don’t have a sewing machine, you can use a blanket stitch and hand sew it.
You Will Need:
Tan or Light Brown Felt (Or a cream would work!)
Darker brown felt.
Stuffing
Cut two loaf shapes out of the lighter color felt. This is a square shape with two bumps on the top. Out of the darker felt, cut two long strips.
Sew your two strips together to make one long strip. Sew the strip along the edge of one of the pieces of bread.
Next, place your other end of the bread on top and sew together, leaving a small hole to add some stuffing.
I like to create a few pieces of bread for our felt food to make sandwiches. Your kiddos can top with an egg and bacon for a breakfast feast. Or cut out a strawberry jam blob for toast with jam. Other good ideas include: peanut butter, cheese slices, bologna, etc!
Every breakfast needs some fruit. We love strawberries.
You Will Need:
Red Felt
Green Felt
Cut out two red heart shapes and a green top.
Place your two heart shapes on top of each other and add the top. Sew around the edges of the heart, leaving a small opening to add the stuffing.
Add stuffing and stitch closed.
Joshua’s favorite breakfast is definitely waffles.
You Will Need:
Tan Felt
Cut out two squares of tan felt. Also, you will need two long strips.
Cut your strips in half to fit on a grid pattern on one of your waffle squares. Sew the strips to the top of the waffle.
Place your second waffle square on top of the waffle you just sewed. Sew around the edges leaving a small opening to flip right side out and stuff. Sew the hole closed.
To top your waffle:
Cut out a syrup blob and a square of butter. Yum!
Every good breakfast needs milk. And that includes your felt food breakfast! Just cut a strip of white felt. Roll it and place in a clear glass!
Did you know that many children face hunger and don’t have access to milk? But you can help! By purchasing Great Value Milk from Walmart, Lenders Bagels or Del Monte Fruit & Veggie Fusions you are helping not only to feed your kiddos (and yourself) a great breakfast, but also helping Feeding America provide nutrient rich milk to kids and families in need. More than 46 million Americans – 12 million of them children – rely on food banks to help them. Milk is often the most requested item and the least donated meaning that children are missing out on the 8 grams of high protein and 9 essential nutrients it has. Together we can help! You can learn more about how you can make a big impact here!
Here is a bonus tip! Get a clear tote to hold your felt food, plates, cups, etc. We used a sharpie to draw a stove top burner, pretend knob and timer. Kids love to use it to play on and it keeps all of their food together.
If you are looking for a fun, quick, easy and practical DIY project then you have found it! Non-Slip Headbands are all of those and super cute! I see them at all the stores, craft shows and online and it’s easy to see why!
I love them because they won’t budge, which means they are great for workouts! The colors and designs are just about endless. Plus you can make them in a variety of widths! Plus, they take about 5 minutes to whip up!
What you need:
Ribbon – Grosgain works better than Satin. We also really like to use the sparkly ‘ribbon’
Velvet Ribbon – Choose a size that corresponds with your ribbon width.
Elastic – I use 1/2 inch
Corresponding thread
The first thing you will want to do is measure. I like to create a ‘template’ if you will. I make my headbands 16 1/2 inches long. So I don’t have to get my measuring tape out for each ribbon I just drew a line on a piece of paper that was 16 1/2 inches long and just use it to measure. (Please note that this size is for an adult/teen/tween. If you are making a child’s size you will need to shorten it)
Cut both a piece of ribbon and the velvet to 16 1/2 inches. Then cut your elastic to 6 1/2 inches long.
Then, lay your ribbon on top of the velvet so that you have the velvet showing on one side and the pattern of your ribbon showing on the other. Pin the ribbons together.
This is the hardest part! So you don’t have any rough edges or unraveling we are going to fold the edges. I fold mine in about 1/2 inch.
Just make sure you have both of the ribbons about equal! When you have them folded in stick one edge of the elastic in between the layers. Again, I sandwich the elastic about 1/2 inch in!
Sew a straight line just straight down to keep everything in place. I don’t worry about back stitching on this part because we are going to sew all the way around it in just a minute!
Repeat on the other side.
It should look like a headband now!
Sew around the edges. Make sure you back stitch!
Soon you will have a whole bunch of non-slip headbands! Play with the widths and patterns! These are perfect to make for gifts and craft shows too!
Ta da!
Love DIY projects? Check out our DIY projects here!
Want even more DIY projects? Check out our Pinterest page! It’s FULL of amazing projects!